Return to main page

Interactive Leveling Guides

Right click and choose 'Save as...'
TheBookOn3D Type: STL
Length-Width: 4 in. x 4 in.
Height: 1.2mm
Download
TheBookOn3D Type: STL
Length-Width: 3 in. x 3 in.
Height: 1.2mm
Download
TheBookOn3D Type: STL
Length-Width: 2 in. x 2 in.
Height: 1.2mm
Download
TheBookOn3D Type: STL
Length-Width: 1 in. x 1 in.
Height: 1.2mm
Download
INTERACTIVE LEVELING INSTRUCTIONS
Use these interactive Leveling Guides to level your build plate to the extruder head.
  1. Download, slice and prepare the Leveling_x_.stl
  2. Send file to printer and begin print
  3. Once print has begun adjust build platform height so solid, smooth layers without gaps are printed on the first layer
  4. If there is space between lines, the build plate is too low = raise build platform
  5. If the lines are overlapping onto each other, the build plate is too high = lower build platform
  6. Observe and adjust your build plate accordingly.

Filament Suppliers

Looking for refills of ABS or PLA? Thinking about experimenting with wood, ceramic or nylon? Check out this list of filament suppliers we have put together to address all your printable material wants and needs.

Maintenance, Tutorials & Additional Resources

Jams, clogs, air-prints, clicks and ticks are common issues that consumer model 3d printers run into, check out the list below for solutions, walk-throughs and other resources to help you get your printer working at optimum levels again.